Photoluminescent film (PL self-adhesive vinyl )a luminescent product produced on the basis of long afterglow photoluminescent
powder, It is made of soft plastic, backed with adhesive paper, nontoxic and
harmless. It doesn't contain any radioactive elements and is characterized by
quick light absorption, longer afterglow and longer service life.
Characteristics:
1.Nontoxic ,non-radioactive;
2.Flame resist;
Salty and detergent resist (can be washed with detergent);
3.Heat and cold resistant (-20 to 50ºC);
4.Excellent physical and mechanical properties;
5.Instant adhesiveness;
6.Printable with silk screen pattern;
7.Cutting property.
Application Scope:
1.Switches for electric appliances, remote control panel, wall switches, plugs, receptacles, locks, hand torches, door handles, handrails, fire extinguishers, fire alarms, lifesaving devices, etc.
2.Safety Markings: emergency exits and passages, subway stations, underground passages, civil air defense projects, Kara OK hall, dance halls, cinemas, supermarket stores, hospitals, railway stations, airports, terminals, etc.
Notes
1.Applied to evenly spread surface at the temperature of 10~40ºC.
2.It should be cleaned and free of oil stain, dust, and any other impurity when the film is applied to the surface of any object, .
3.Cautious storage is required for film after specific cutout. Meanwhile, it should be clamped or pressed with weight to prevent distortion and curling.
4.Removed the back paper before use. The film should be applied to object surface with certain press. Special notice should be given to the corner and film edge during application.
5.The remaining film (roll) after application should be enlaced as tightly as possible.
Package & Storage:
1.Package: Inner :plastic in roll or sheet; external:carton;
2.Storage: stored in ventilated, dry, and cool warehouse whose ambient temperature is 10-40 ºC and relative humidity below 70%.
